02 9525 3377
Contact Us:
02 9525 3377
Celebrating 33 years

Our techniques explained

 

There are two ways we can achieve the look you desire. Grind and polish or grind and seal. Both start with the grind.

GRIND AND POLISH - this is the process where we grind the surface of the slab with diamonds embedded in metal to achieve the look you want. Once the overall basic look has been reached there are two methods of achieving the finished look. A full polished floor means just that - there can be up to 14 stages involved, including densifying the concrete before we start to grind, grouting the entire floor to fill in any holes that may be exposed during the grind and then moving through a range of diamonds using finer and finer diamonds until we achieve a mirror like finish. This gives you a tough, resilient easy to maintain floor.

GRIND AND SEAL - this system starts out the same as a grind and polish but we stop at one of the lower grit diamonds and then achieve the shiny easy to mop finish by coating the floor with a topical seal. Although a cheaper alternative, the look of these floors can be fantastic. Maintenance involves reapplying a topical seal as the floor starts to look dull and scratched. How often is entirely dependent upon the type of traffic the floor will experience.

Not sure what you need? We are here to help.

Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save SaveSave Save